AREA

square-mils to centiares

1 Square-mils

6.4516E-10

Centiares

Copy Result

swap
Embed this to your site/blog
Information about Area Conversion
Category: Area
Conversion: Square Mils to Centiares
The base unit for Area is Square Meters (Non-SI/Derived Unit).
[Square Mils] symbol/abbreviation: (sq mil)
[Centiares] symbol/abbreviation: (ca)

How to Convert Square Mils to Centiares (sq mil to ca)

1 sq mil = 6.4516E-10 ca.
1 x 6.4516E-10 ca = 6.4516E-10 Centiares.
Always check the results; rounding errors may occur.

Definition

A square mil is a unit of area, equal to the area of a square with sides of length one mil. A mil is one thousandth of an international inch. This unit of area is usually used in specifying the area of the cross section of a wire or cable.

In Relation to Base Unit

In relation to the base unit of [Area] => (Square Meters), 1 Square Mils (sq mil) is equal to 6.4516E-10 square-meters, while 1 Centiares (ca) = 1 square-meters.

More

Acceleration (m/s²)Angle [plane] (rad)Area (m²)Data Storage (B)Data Transfer Rate (B/s)Density (kg/m³)Electric Charge (C)Electric Current (A)Electric Resistance (Ω)Energy (J)Force (N)Frequency (Hz)Fuel Consumption (km/L)Length (m)Mass, Weight (kg)Mass Flow Rate (kg/s)Power (W)Pressure (Pa)Speed (m/s)Temperature (K)Time (s)Torque (N·m)Volume (m³)Volume Flow Rate (m³/s)Quantity (dimensionless)
1 Square Mils to area Conversions
1 Square Mils Converted to Common area Units
1 sq mil 6.4516E-10 square meters (m2, sq m)
1 sq mil 6.4516E-6 square centimeters (cm2, sq cm)
1 sq mil 6.4516E-16 square kilometers (km2, sq km)
1 sq mil 6.9444474344208E-9 square feet (ft2, sq ft)
1 sq mil 1.0E-6 square inches (in2, sq in)
1 sq mil 7.716049382716E-10 square yards (yd2, sq yd)
1 sq mil 2.4909766863756E-16 square miles (mi2, sq mi)
1 sq mil 1 square mils (sq mil)
1 sq mil 6.4516E-14 hectares (ha)
1 sq mil 1.5942236697094E-13 acres (ac)
Square Mils to Centiares (Table Conversion)
Square Mils to Centiares (table conversion)
1 sq mil = 6.4516E-10 ca
2 sq mil = 6.4516E-10 ca
3 sq mil = 6.4516E-10 ca
4 sq mil = 6.4516E-10 ca
5 sq mil = 6.4516E-10 ca
6 sq mil = 6.4516E-10 ca
7 sq mil = 6.4516E-10 ca
8 sq mil = 6.4516E-10 ca
9 sq mil = 6.4516E-10 ca
10 sq mil = 6.4516E-10 ca
20 sq mil = 6.4516E-10 ca
30 sq mil = 6.4516E-10 ca
40 sq mil = 6.4516E-10 ca
50 sq mil = 6.4516E-10 ca
60 sq mil = 6.4516E-10 ca
70 sq mil = 6.4516E-10 ca
80 sq mil = 6.4516E-10 ca
90 sq mil = 6.4516E-10 ca
100 sq mil = 6.4516E-10 ca
200 sq mil = 6.4516E-10 ca
300 sq mil = 6.4516E-10 ca
400 sq mil = 6.4516E-10 ca
500 sq mil = 6.4516E-10 ca
600 sq mil = 6.4516E-10 ca
700 sq mil = 6.4516E-10 ca
800 sq mil = 6.4516E-10 ca
900 sq mil = 6.4516E-10 ca
1000 sq mil = 6.4516E-10 ca
2000 sq mil = 6.4516E-10 ca
4000 sq mil = 6.4516E-10 ca
5000 sq mil = 6.4516E-10 ca
7500 sq mil = 6.4516E-10 ca
10000 sq mil = 6.4516E-10 ca
25000 sq mil = 6.4516E-10 ca
50000 sq mil = 6.4516E-10 ca
100000 sq mil = 6.4516E-10 ca
1000000 sq mil = 6.4516E-10 ca
1000000000 sq mil = 6.4516E-10 ca

Square Mils to random (area units)

Random [area unit] conversions