AREA

square-mils to dekares

1 Square-mils

6.4516E-13

Dekares

Copy Result

swap
Embed this to your site/blog
Information about Area Conversion
Category: Area
Conversion: Square Mils to Dekares
The base unit for Area is Square Meters (Non-SI/Derived Unit).
[Square Mils] symbol/abbreviation: (sq mil)
[Dekares] symbol/abbreviation: (da a )

How to Convert Square Mils to Dekares (sq mil to da a )

1 sq mil = 6.4516E-13 da a .
1 x 6.4516E-13 da a = 6.4516E-13 Dekares.
Always check the results; rounding errors may occur.

Definition

A square mil is a unit of area, equal to the area of a square with sides of length one mil. A mil is one thousandth of an international inch. This unit of area is usually used in specifying the area of the cross section of a wire or cable.

In Relation to Base Unit

In relation to the base unit of [Area] => (Square Meters), 1 Square Mils (sq mil) is equal to 6.4516E-10 square-meters, while 1 Dekares (da a ) = 1000 square-meters.

More

Acceleration (m/s²)Angle [plane] (rad)Area (m²)Data Storage (B)Data Transfer Rate (B/s)Density (kg/m³)Electric Charge (C)Electric Current (A)Electric Resistance (Ω)Energy (J)Force (N)Frequency (Hz)Fuel Consumption (km/L)Length (m)Mass, Weight (kg)Mass Flow Rate (kg/s)Power (W)Pressure (Pa)Speed (m/s)Temperature (K)Time (s)Torque (N·m)Volume (m³)Volume Flow Rate (m³/s)Quantity (dimensionless)
1 Square Mils to area Conversions
1 Square Mils Converted to Common area Units
1 sq mil 6.4516E-10 square meters (m2, sq m)
1 sq mil 6.4516E-6 square centimeters (cm2, sq cm)
1 sq mil 6.4516E-16 square kilometers (km2, sq km)
1 sq mil 6.9444474344208E-9 square feet (ft2, sq ft)
1 sq mil 1.0E-6 square inches (in2, sq in)
1 sq mil 7.716049382716E-10 square yards (yd2, sq yd)
1 sq mil 2.4909766863756E-16 square miles (mi2, sq mi)
1 sq mil 1 square mils (sq mil)
1 sq mil 6.4516E-14 hectares (ha)
1 sq mil 1.5942236697094E-13 acres (ac)
Square Mils to Dekares (Table Conversion)
Square Mils to Dekares (table conversion)
1 sq mil = 6.4516E-13 da a
2 sq mil = 6.4516E-13 da a
3 sq mil = 6.4516E-13 da a
4 sq mil = 6.4516E-13 da a
5 sq mil = 6.4516E-13 da a
6 sq mil = 6.4516E-13 da a
7 sq mil = 6.4516E-13 da a
8 sq mil = 6.4516E-13 da a
9 sq mil = 6.4516E-13 da a
10 sq mil = 6.4516E-13 da a
20 sq mil = 6.4516E-13 da a
30 sq mil = 6.4516E-13 da a
40 sq mil = 6.4516E-13 da a
50 sq mil = 6.4516E-13 da a
60 sq mil = 6.4516E-13 da a
70 sq mil = 6.4516E-13 da a
80 sq mil = 6.4516E-13 da a
90 sq mil = 6.4516E-13 da a
100 sq mil = 6.4516E-13 da a
200 sq mil = 6.4516E-13 da a
300 sq mil = 6.4516E-13 da a
400 sq mil = 6.4516E-13 da a
500 sq mil = 6.4516E-13 da a
600 sq mil = 6.4516E-13 da a
700 sq mil = 6.4516E-13 da a
800 sq mil = 6.4516E-13 da a
900 sq mil = 6.4516E-13 da a
1000 sq mil = 6.4516E-13 da a
2000 sq mil = 6.4516E-13 da a
4000 sq mil = 6.4516E-13 da a
5000 sq mil = 6.4516E-13 da a
7500 sq mil = 6.4516E-13 da a
10000 sq mil = 6.4516E-13 da a
25000 sq mil = 6.4516E-13 da a
50000 sq mil = 6.4516E-13 da a
100000 sq mil = 6.4516E-13 da a
1000000 sq mil = 6.4516E-13 da a
1000000000 sq mil = 6.4516E-13 da a

Square Mils to random (area units)

Random [area unit] conversions